2020. 2. 12. 13:39ㆍ카테고리 없음
An IP bullet camera that is outdoor rated and has IR for night use? This Toshiba fits the bill. I had someone create create a custom driver, which had to be tweaked to work with 2.0. I should get them up and running today if the driver works as planned.Thanks! How did you decide on the Toshiba versus other cameras?
Do the wires get hidden in the bracket or are they outside as shown in the picture?Has anyone used other cameras? Just trying to get an idea of what is out there in terms of bullet cameras for outdoors.Has anyone used any of the Speco Technology cameras successfully?Thanks for your input! Edited August 20, 2010 by Gene. ^ The Toshiba was the only camera that seemed to fit my parameters (IP, POE, IR, outdoor, bullet) and also be reasonably priced. Control4 only supports certain resolutions (max is I think 640x480 or something close) and so that is a big limitation too. I wish C4 supported some of the awesome hi-def megapixel cameras, but so far they do not.That black wire coming out of the camera is how the wires exit the camera. Since it is an outdoor housing, the wire seal is waterproof.
I tucked the wire through that hole in the bracket for a neat install, but I had to cut off some of the things I didn't need (audio, etc). On the subject of Digital camera server drivers. I've got a Stardot Express6 analogue to digital camera server. Ive had it near on 4 years now and it's never failed me.
But full integration of digital video streams has never been supported within Control4. Basically I get one frame of each camera come up. I know Ive set the server up correctly, because I can get live streaming into other apps on my ipad. My Dealer says only Axis and Panasonic can provide full live streaming into Control4.
I need a video server with at least 6 inputs. Is there such an Axis or panasonic server with full Control4 digital video streaming within Navigator and the C4 iPad app? Edited August 28, 2010 by wappinghigh. Alex the Axis 291 has hot swappable bays which allow each bay to hold 4 analog inputs. There are 3 bays in the unit so the server will allow upto 12 cameras. Alternatively you can also use multiple 240/241q's on different IP addresses and that will work as well.
These solutions will be suitable to your needs.Most IP cameras are not compatible with Control4 not due to its functionality but due to its protocol. Control4 have specific requirements to integrate 3rd party IP cameras that do not fit 99% of cameras on the market. Basically to sum it up the Camera must support HTTP Basic Authentication for its login, URL parameters in the form of 160x120, 320x240 & 640x480 for image resolutions and the MJPEG and JPEG streams/image must be accessible via the web server on the same port.At one stage we were looking at developing a low cost camera solution here at Convergent Technologies. We worked with some chinese manufacturers to develop a camera that suited Control4's requirements.
Control4 Ip Camera Drivers
Control4 Driver Database
Unfortunately due to lack of support from the manufacturer we have had to scrap the project. We managed to get two trial units working 100% but with extensive firmware modification.Another alternative is to develop a 4store application that links up to your camera. This is a way to get around Control4's requirements. Note that this will only work on flash navigators and will not work on legacy navigators or via 4sight.
One consideration when trying to achieve this is processing power of the navigators. The onscreen navigator for existing HC200/300's (ie not the new version that is about to come out) will not have the power to give you full framerates.I hope this helps.
IntesisBox Driver for Control4Most HVAC installations in the United States are easy as most thermostats utilise a universal standard and as such can be replaced easily by a 3rd party thermostat such as Control4’s thermostat.Unfortunately alot of HVAC manufacturers do not utilise this standard and have proprietary closed communications that are specific to that HVAC manufacturer. This makes it extremely cumbersome for Control4 dealers to source a reliable HVAC product and in many countries Control4 dealers do not even bother with HVAC integration because it is just too hard. Luckily Intesis have released their range of IntesisBox wifi gateways. The IntesisBox allows you to easily integrate HVAC systems into Control4 by retrofitting the IntesisBox gateway into the existing indoor unit.
Intesis offer two gateway types.Specific IntesisBox’s are developed to communicate with the HVAC manufacturer’s proprietary communications protocol allowing for true real time bidirectional communication with the system.Universal IntesisBox’s are developed to offer compatibility with thousands of HVAC models through infra red and offer room temperature feedback via a sensor in the IntesisBox.Chowmain’s IntesisBox driver for Control4 will work with all models of IntesisBox and will provide full two way control/feedback.Features. In Australia and New Zealand (and other countries) HVAC integration has been hard because HVAC companies do not utilise the honeywell based wiring that most smart thermostats like Nest, Control4 and Honeywell use. Split Systems have been extremely hard as traditionally they only offer IR or RF based remote controls. In the past we have integrated these systems by learning every combination of IR code however this is extremely time consuming. Also integration for ducted systems and VRF systems were hard because manufacturers have their own propriatary bus.Now with the IntesisBox installers can now easily integrate HVAC systems into Control4.
The IntesisBox is affordable unlike other solutions so the cost of integration per zone is extremely low. On top of that it communicates via wifi so dealers can now revisit old customers with compatible HVAC systems to upgrade their home automation system and integrate their HVAC systems without additional wiring.This really changes the HVAC game.What HVAC systems can i use this driver with? IntesisBox is compatible with a range of HVAC systems.
Please see the to check if the HVAC system you want to integrate has a specific IntesisBox or is compatible with the universal IntesisBox. Their website will have the most upto date information about supported models.If you are unsure if you HVAC system is supported please contact Intesis support (support@intesis.com) and they will advise if you HVAC system is supported and what model IntesisBox you need to purchaseAt the time of writing this Intesis have specific bus based IntesisBox make/models for. Can i control fan direction with this?Yes our driver allows for up/down and left/right vane control.
This is accessible under the Extras Tab.Can i do schedule the HVAC system using this?Yes our driver has built in presets and scheduling.Where can i purchase this module?Intesis sells the IntesisBox in over 90 countries. They mainly sell direct. The product has regulatory compliance for Europe, US, Canada and Australia. If you have any sales enquiries please contact Intesis Sales directly via their or via email (sales@intesis.com)Why do you only support OS 2.7 and above?This driver requires functionality that is only available in OS 2.7. As such this driver will not work in earlier versions of Control4 OS.I want to try this driver out before buying it?All Chowmain drivers for Control4 come with a 7 day trial.